- Graphics card holder, supports up to 7.5KG weight
- Transparent Acrylic with laser carving design
- Easy to fit in with any size graphics card
- Mystic Light and Sync: Build in addressable RGB LEDs and supports Mystic Light Sync, controlled in one click.
Note: Please make sure there are at least 3 empty PCI slots under the graphics card in the chassis. If there aren’t enough PCI slots below, you cannot install it.
- The screws on the fixed graphics card need to be removed from the PCI vertical block.
- The screw position with the rivet protruding can't be used, e.g., CORSAIR 570X RGB
- The chassis with a fan on the bottom of the chassis may not be supported, e.g., InWin 303
- The chassis without 3 screws below the graphics card cannot be used.
FEATURES
- Transparent Acrylic with laser carving design
- 10 mounting hole to fit in with any size graphics card
- Mystic Light and Sync: Build in addressable RGB LEDs and supports Mystic Light Sync, controlled in one click.
SPEC
- Dimension: 260x54x5mm
- Supports up to 7.5KG graphics card weight
- Supports up to 320x140x61mm graphics card size
- Addressable RGB LED
- Supports 1x JRAINBOW connector RGB PIN HEADER 3-pin (5V) CABLE LENGTH 450mm